Matte-black 40-yard roll-off dumpster staged on a framed-out residential construction site in Rochester, framing lumber stacked nearby, hooklift delivery truck visible in the background under bright Colorado daylight

Construction dumpster rental in Rochester

Need a 30-Yard Container staged with same-day swap-outs? Driveway boards protect the surface, and the roll-off drops clean every time.

Jobsite Roll-off Containers for General Contractors

Our construction fleet runs 20-, 30-, and 40-yard roll-offs across the Rochester metro and Monroe; these containers feature reinforced steel sidewalls, walk-in rear swing doors, and steel bottom rollers for framers, roofers, and demo crews. We set every bin on driveway boards for site protection. Call (585) 612-4508 for contractor pricing and tonnage rates on long-term commercial hauling agreements for your multi-phase projects.

Matte-black 20-yard roll-off construction dumpster with heavy ribbed steel sidewalls and swing rear doors at a working jobsite in Rochester, sitting directly on compacted dirt with an unmarked white hauler partially visible at the far edge of the frame.

20-yard construction roll-off

The 20-yard roll-off is 20' long, 7' wide, and 4' tall, holding up to 2 tons at no extra cost.

This 20-yard roll-off fits kitchen and bath remodels, single-room demo, and small framing jobs in tight spaces.

Matte-black 30-yard roll-off construction dumpster sitting directly on the compacted-dirt site of a framed single-family home build in Rochester, drywall and lumber scrap loaded inside.

30-yard construction roll-off

The 30-yard roll-off runs 22 feet long, 8 feet wide, and 6 feet tall, with about 4 tons included for your project.

A 30-yard container handles whole-house remodels, additions, and new-build framing with tall walls for bulky drywall and lumber.

Matte-black 40-yard roll-off construction dumpster being lowered from a white-cab hooklift delivery truck onto the compacted-dirt jobsite at a commercial build site in Rochester

40-yard construction roll-off

The 40-Yard Roll-Off container stretches 22 feet long, 8 feet wide, and 8 feet tall, and holds about 5 tons of debris on the haul.

Sized for commercial builds and large tear-outs, the 40-yard roll-off is the largest container we stage on jobs.

Construction Debris, Drywall, Lumber Acceptance

Our roll-off containers accept the full range of mixed C&D debris: framing lumber, drywall, plaster, subfloor, insulation, packaging, pallets, and light metals. These loads are sorted at the Rochester transfer station to maximize recovery — contractors on steady jobs often choose commercial recurring hauling agreements. For further details on handling these streams, consult the EPA construction debris recycling guidance while you fill your container. Call (585) 612-4508.

  • Framing lumber and offcuts
  • Drywall, plaster, lath
  • Subfloor and sheathing
  • Insulation and vapor barrier
  • Mixed packaging and pallets
  • Light metals and conduit
Worker in a yellow high-visibility vest tossing framing lumber and broken drywall into a matte-black 30-yard construction roll-off dumpster on an active build site in Rochester, bright daylight
Low-profile matte-black lowboy roll-off dumpster loaded with broken concrete slab and rebar at a foundation tear-out in Rochester, skid steer parked beside it, sunny Colorado morning

Concrete, Brick, and Asphalt Heavy-debris Pricing

Dense materials won’t work in a regular roll-off. Our reinforced-steel lowboy roll-offs are built for concrete slab tear-out, brick demo, asphalt millings, and clean dirt—up to 10,000 pounds per load. The low 2-to-3-foot side walls let skid steers and wheelbarrows dump straight over the rim without busting USDOT truck weight limits on Rochester routes.

Heavy-debris jobs run on a weight ticket from the scale house, not a flat fee; the cleanest loads—which contain no mixed wood, drywall, or trash—earn our lowest per-ton rate. I size the container and dispatch the dumpster after a quick call with the site super to verify the total tonnage.

Tonnage Limits and Weight Overage Policy

Every construction roll-off comes with an included tonnage allowance; this weight limit is clearly defined in your upfront quote: you get a set capacity based on the container size. We bill any overage at our published per-ton rate after the truck weighs in at the scale-house. We recommend roofing tear-off jobsite containers—shingles run heavy—to ensure that weight does not eat your mixed-debris allowance.

20-yard

3 tons

Included tonnage. Mixed C&D debris.

30-yard

4 tons

Included tonnage. Mixed C&D debris.

40-yard

5 tons

Included tonnage. Mixed C&D debris.

On-site Swap-out and Dispatch Coordination

Long-term jobs run on a swap-out rhythm, not single drops; text or call dispatch when a container is full — we’ll roll a fresh roll-off to the same staging pad the same or next business day across the Rochester metro and Monroe.

Step 1

Text dispatch when full

Site supers text the dispatcher a photo and the container number—no portal logins or ticketing needed.

Step 2

Same- or next-day swap

We haul the full container, drop the empty on the same staging pad, and keep the job moving without losing a loading hour.

Step 3

Weekend dispatch available

Saturday pulls keep Monday starts clean; Friday afternoon coordination makes the turn smooth.

Insurance and Contractor Account Setup

We handle certificates of insurance for the GC or owner and run net-30 contractor accounts with consolidated monthly billing across active sites in Rochester; the hooklift fleet stages the recurring bins—accounts spin up with one call to dispatch.